Templar Garage Screen Door Lake Elsinore, CA Installations Built to Measure

A Templar garage screen door Lake Elsinore, CA homeowners specify sits at the heavier end of the screen market, and that is exactly the point. The frames are constructed of thicker extrusion; the tracks maintain alignment under wind load, and the mesh is tighter than that of lighter systems that lose alignment after a season. 


All of our units are fitted to the measured opening, not a stock kit; this is particularly important on very large bays and frames which are not square. Licensed (951) 570-5707 | BBB A+ | Fully Insured. Call (951) 570-5707 to arrange a measure.

Red button with
A button that says get a free quote today

Templar Garage Screen Door Lake Elsinore, CA Configurations We Build

Manual Full Width Units

Most drops on this retractable garage screen Inland Empire homes have a tensioned mesh panel over the doorway and roll up into a slender overhead housing. Travel stays smooth because the side tracks are machined rather than rolled. Standard bays are straightforward.

Motorized Drive Systems

Whenever a motor operates the screen, it is easier to live with wide or high openings. The drive operates from a wall control or remote and holds preset upper and lower limits. Wiring is integrated with the garage circuit during fitting.

Oversized and RV Height Openings

For RVs, boats, or three vehicles, bays are an overhang that will not sag with off-the-shelf screens. A custom garage screen door Lake Elsinore properties that size need is fabricated to the exact drop with reinforced rails. Wind bracing is provided where gusts have the effect.

Walk Through Passage Sections

A magnetically sealed passage panel allows the movement of personnel into and out of the tensioned mesh. Every Templar garage screen door Lake Elsinore, CA build can carry one, closing cleanly instead of developing the gap cheaper systems show. 

Heavy Duty and Solar Mesh

The mesh size determines durability, visibility, and what percentage of the afternoon glare will penetrate. We supply standard insect mesh, reinforced pet grade weave and solar mesh for the worst western sun. Samples are viewed in your own doorway first.

Service and Component Replacement

A robust system will require tension checks and track cleaning after several years of daily operating. We retension springs, replace rollers, and refit mesh as a Templar screens installer; Riverside County homeowners call back. 

Black car icon with a blank sign or billboard above it

Why Choose Garage Doors Hero and Gate for Templar Screens in Lake Elsinore

Licensed and Insured California Contractor

License (951) 570-5707 is for correct anchoring, safe tensioning, and code-compliant wiring on motorized units. Templar screen door installation California requires a licensed fitter.

Same Day Service With Fully Stocked Trucks

Rollers, tension springs and track sections are brought to service any Templar garage screen door Lake Elsinore, CA install. The majority of adjustments require no return visit.

Family Owned, Not a Franchise

Retension and adjustment work their way to the crew that installed it while Riverside County owners begin the call-back process as Templar screens installers Riverside County. Nothing goes to another network.

BBB A+ Accredited With Verified Customer Reviews

Accreditation and an obvious review history provide evidence prior to deciding on a custom build. Local installations are used as references.

Garage Door Brands We Service in Lake Elsinore

Every Templar garage screen door Lake Elsinore, CA housing shares the opening with your door and opener, so we check compatibility across LiftMaster, Chamberlain, Genie, Clopay, Amarr, CHI, Wayne Dalton, and Linear. The position of the rail, track clearance, and header space determine where a housing will mount. Call us if your brand is not listed; we service all major brands of garage doors.

A button that says get a free quote today

Why This Valley Is Hard on Lighter Screen Systems

A Templar garage screen door Lake Elsinore, CA installation is able to last longer than lighter systems, and the explanation is not dependent on mesh quality. Wind is the first. Santa Ana gusts blow directly down the Ortega Highway corridor, and a light frame bends sufficiently to cause the mesh to leap its track.


Heat is the second. The aluminum adjusts track clearance throughout the day, and west-facing openings cross Tuscany Hills and Canyon Hills, soaking in afternoon sun. Movement that a retractable garage screen Inland Empire can't beat has to be absorbed without binding.


The third, and longest lasting, is dust, which deposits itself in side channels until travel is made rough. Machined tracks shed grit better, and every Templar garage screen door Lake Elsinore, CA quote accounts for orientation and exposure.

Red button with

How Our Templar Fitting Process Works in Lake Elsinore

01

Detailed Opening Survey

We measure width, drop, squareness, and side clearance and document the mounting of door hardware. Fabrication will not begin until these numbers are confirmed.

02

Specification and Written Quote

A written fixed quote is issued and will provide a price for grade, type of drive, and color. Nothing is ordered unless it has your approval.

03

Fabrication and Installation

The Templar screen door installation California standards start when the unit is constructed as per your measurements. Installation of tracks, housing, and panel takes about 3-4 hours.

04

Commissioning and Handover

We play the screen over and over again, tweak the tension, and show the passage panel & remotes. Adjustments are done prior to departure.

Lake Elsinore Neighborhoods and ZIP Codes We Serve


Templar garage screen door Lake Elsinore, CA surveys are sent to ZIP codes 92530 and 92532 on Railroad Canyon Road and Mission Trail.

● Tuscany Hills

● Canyon Hills

● Summerly

● Alberhill Ranch

● Lakeland Village

● Rosetta Canyon

● Westlake

If your neighborhood is not listed, give us a call; we serve the whole Lake Elsinore area!

Arrange Your Custom Screen Survey Now!


A Templar garage screen door Lake Elsinore, CA homeowner orders is a ten-year decision, so frame and fit matter more than the sticker. We measure the opening and make up the tension of the panel to the numbers we measure. Garage Doors Hero and Gate holds License (951) 570-5707, carries BBB A+ accreditation, and has fitted custom garage screen door Lake Elsinore projects for years. Surveys are free with no obligation.

A button that says get a free quote today

Frequently Asked Questions

  • What is a Templar garage screen door?

    Templar is a premium brand of retractable garage screen door that mounts inside an existing garage door frame. When deployed, it creates a full-width insect-proof barrier allowing airflow, natural light, and outdoor visibility while keeping mosquitoes, flies, and debris out. When not in use, it retracts into a compact housing mounted above the opening, leaving the garage door completely unaffected. Templar Screens are known for heavier-gauge screen material and more durable housing than standard retractable screens.

  • How is a Templar screen different from a standard Lifestyle Screen Door?

    Templar Screens are a specific premium product line under the Lifestyle Screen brand. Compared to standard Lifestyle Screen Door models, Templar Screens feature heavier-gauge screen material for greater durability, a more robust housing construction that withstands frequent use, and a cleaner aesthetic finish that sits neatly inside the garage opening. They are ideal for Lake Elsinore homeowners who want a premium screen solution for year-round use as a garage workshop, gym, or outdoor living extension.

  • Can a Templar screen door be installed on my existing garage in Lake Elsinore?

    Templar Screens are compatible with most standard residential garage openings in Lake Elsinore, including both single-car and double-car openings, typically without modification to the existing garage door, tracks, or frame. Our technicians measure the opening, select the correct Templar housing size, and complete installation in a single visit. Some older or non-standard openings in Lake Elsinore's historic district or custom-built properties may require minor adjustment to the mounting header. Contact Garage Doors Hero for a free in-home assessment.

  • How much does Templar screen door installation cost in Lake Elsinore CA?

    Templar garage screen door installation in Lake Elsinore typically costs between $900 and $1,800 depending on the garage opening size (single vs double car) and the specific Templar model selected. Single-car openings generally fall toward the lower end of this range. Double-car openings with premium Templar hardware typically fall at the higher end. This is slightly higher than standard Lifestyle Screen Door pricing due to Templar's heavier-gauge materials and more durable housing. Garage Doors Hero provides free in-home estimates with no obligation.

  • Does Garage Doors Hero install Templar Screens throughout Riverside County?

    Garage Doors Hero installs Templar Screens and Lifestyle Screen Doors across all service cities in southwest Riverside County including Lake Elsinore, Menifee, Murrieta, Temecula, Wildomar, and French Valley. Our technicians are trained and experienced with both product lines and handle the complete installation process including measurement, product selection, mounting, and final testing. All Templar Screen installations by Garage Doors Hero include a workmanship warranty on labor. Contact us at (951) 570-5707 for a free in-home assessment.